Fluid Transposer


Fluid transposer

Filling buckets by hand is hard work.

A fluid transposer, or transposer for short, is a machine that fills and empties items that hold fluids, like buckets.

Obtaining

A placed fluid transposer can be instantly picked up by dismantling it with a crescent hammer. Its configuration is preserved in the item. It can also be mined using a pickaxe, though this is quite slow.

Crafting

Upgrading

A fluid transposer is initially at the lowest tier (basic). It can be upgraded to higher tiers using upgrade kits and conversion kits.

Usage

Processing

A fluid transposer can be in two modes: Fill and Empty.

In Fill mode, a fluid transposer fills or infuses items with fluids. When items are placed in a transposer’s input slot in this mode and the input tank is filled with a fluid, the machine will start consuming Redstone Flux to fill the items with fixed amounts of fluid. Every item requires a certain amount of energy to fill with a certain amount of fluid. When enough energy has been consumed for an item, the input fluid is consumed. A fluid transposer will keep processing the same item until the item is full or the fluid runs out. Otherwise, the output is placed in the output slot.

In Empty mode, a fluid transposer works similarly, except fluids are extracted from items and the tank is an output tank.

The speed at which a fluid transposer processes items depends on how much energy it can use per tick. This in turn depends on how much power is being supplied, and on the machine’s maximum power usage. A basic transposer has a maximum power usage of 20 RF/t. This can be increased by upgrading the machine to a higher tier, and by installing certain augments.

Input and output

Items and fluids can enter and exit a fluid transposer through its sides. Every side of a transposer may correspond to its input slot, its output slot, its input/output tank, or certain tanks/slots at the same time.

A fluid transposer can automatically transfer items and fluids out of any sides that directly correspond to its output slot/tank. This is called auto-output. It can also transfer items from adjacent inventories into any sides that directly correspond to its input slot. This is called auto-input. Auto-output for items and auto-input occurs whenever the machine finishes processing an item, or every 32 ticks (1.6 seconds) if the machine is inactive. Auto-output for fluids occurs whenever there is a fluid in the output tank.

Which sides correspond to which slots/tanks and whether auto-output and auto-input are enabled can be configured using the Configuration tab in the machine’s GUI.

Redstone control

A fluid transposer may be configured to respond to redstone signals. It can be in one of three modes:

Ignored
Redstone control is disabled. The transposer works whenever possible. This is the default mode.
Low
The transposer works when not powered. When powered, it stops working.
High
The transposer only works when powered.

The current mode can be set using the Redstone Control tab in the machine’s GUI.

When a fluid transposer must stop working due to a redstone signal and is still processing an item, it will finish processing that item before stopping.

Security

A fluid transposer can have a signalum security lock installed to restrict who can access it.

Redprints

A fluid transposer’s configuration can be saved on a redprint to be copied to other transposers.

Tiers

Fluid transposers come in six tiers.

Tier Max. power usage Augment slots Max. items per auto-transfer Max. fluid auto-output rate Note
Basic 20 RF/t 0 8 100 mB/t  
Hardened 30 RF/t 1 16 300 mB/t  
Reinforced 40 RF/t 2 28 600 mB/t  
Signalum 50 RF/t 3 44 1000 mB/t  
Resonant 60 RF/t 4 64 1500 mB/t  
Creative 60 RF/t 4 64 1500 mB/t Only obtainable in creative mode.

Augmentation

A fluid transposer can have augments installed to improve certain properties or to change how it works. Augments can be installed in the Augmentation tab in a transposer’s GUI.

Augment Installable in Description
Auxiliary Reception Coil Auxiliary Reception Coil Any machine Increases a machine's maximum power usage (speed) by 1x its base maximum power usage. However, the amount of energy required per operation is also increased. Can be installed multiple times.
Auxiliary Sieve Auxiliary Sieve Machines with
secondary outputs
Increases the chance for a machine to produce secondary outputs. However, the amount of energy required per operation is also increased. Can be installed multiple times.

Recipes

Filling

Items that hold fluids, notably buckets, can be filled with 1000 mB of fluid for 400 RF.

Result(s) Ingredients Energy Fluid Transposer recipe
Moss Stone
Cobblestone +
Water (250 mB)
4000 RF
Mossy Stone Bricks
Stone Bricks +
Water (250 mB)
4000 RF
Concrete
Any color Concrete Powder +
Water (1000 mB)
400 RF
Wet Sponge
Sponge +
Water (1000 mB)
4000 RF
Ice
Cryotheum Dust +
Water (1000 mB)
400 RF
Packed Ice
Ice +
Gelid Cryotheum (200 mB)
400 RF
End Stone
Sandstone +
Resonant Ender (250 mB)
4000 RF
Nether Brick
Brick +
Lava (250 mB)
4000 RF
Mushroom Stew
Bowl +
Mushroom Stew (250 mB)
400 RF
Blaze Powder
Glowstone Dust +
Destabilized Redstone (200 mB)
4000 RF
Blizz Powder
Snowball +
Destabilized Redstone (200 mB)
4000 RF
Blitz Powder
Sand +
Destabilized Redstone (200 mB)
4000 RF
Basalz Powder
Pulverized Obsidian +
Destabilized Redstone (200 mB)
4000 RF
Rich Phyto-Gro
Phyto-Gro +
Sap (500 mB)
2000 RF
Redstone
Cryotheum Dust +
Destabilized Redstone (1000 mB)
400 RF
Glowstone Dust
Cryotheum Dust +
Energized Glowstone (1000 mB)
400 RF
Ender Pearl
Cryotheum Dust +
Resonant Ender (1000 mB)
400 RF
Redstone
Destabilized Clathrate +
Gelid Cryotheum (200 mB)
2000 RF
Glowstone Dust
Energized Clathrate +
Gelid Cryotheum (200 mB)
2000 RF
Ender Pearl
Resonant Clathrate +
Gelid Cryotheum (200 mB)
2000 RF
Redstone Energy Fluxduct
Redstone Energy Fluxduct (Empty) +
Destabilized Redstone (200 mB)
800 RF
Signalum Fluxduct
Signalum Fluxduct (Empty) +
Destabilized Redstone (200 mB)
800 RF
Resonant Fluxduct
Resonant Fluxduct (Empty) +
Destabilized Redstone (200 mB)
800 RF
Cryo-Stabilized Fluxduct
Cryo-Stabilized Fluxduct (Empty) +
Gelid Cryotheum (500 mB)
4000 RF
Impulse Itemduct
Itemduct +
Energized Glowstone (200 mB)
800 RF
Impulse Itemduct (Opaque)
Itemduct (Opaque) +
Energized Glowstone (200 mB)
800 RF
Signalum-Plated Impulse Itemduct
Signalum-Plated Itemduct +
Energized Glowstone (200 mB)
800 RF
Signalum-Plated Impulse Itemduct (Opaque)
Signalum-Plated Itemduct (Opaque) +
Energized Glowstone (200 mB)
800 RF
Viaduct
Viaduct (Untreated) +
Zephyrean Aerotheum (100 mB)
800 RF
Long Range Linking Viaduct
Viaduct +
Resonant Ender (1000 mB)
8000 RF
Fluxed Electrum Blend
Electrum Blend +
Destabilized Redstone (500 mB)
400 RF
Flux Crystal
Diamond +
Destabilized Redstone (500 mB)
400 RF

Emptying

1000 mB of fluid can be drained from items like filled buckets for 400 RF.

Result(s) Ingredients Energy Fluid Transposer recipe
Water (500 mB)
Cactus
2400 RF
Water (1000 mB)
Sponge
Wet Sponge
4000 RF
Mushroom Stew (250 mB)
Bowl
Mushroom Stew
400 RF
Thermal Expansion
Machines Redstone Furnace Pulverizer Sawmill Induction Smelter Phytogenic Insolator Compactor Magma Crucible Fractionating Still Fluid Transposer Energetic Infuser Centrifugal Separator Glacial Precipitator Igneous Extruder
Devices Aqueous Accumulator Nullifier Thermal Mediator Arboreal Extractor Aquatic Entangler Item Allocator
Dynamos Steam Dynamo Magmatic Dynamo Compression Dynamo Reactant Dynamo Enervation Dynamo Numismatic Dynamo
Storage Energy Cell Flux Capacitor Portable Tank Cache Strongbox Satchel
Tiers Upgrade Kits Conversion Kits
Augments
Machine Auxiliary Reception Coil Auxiliary Sieve Nullification Chamber Trivection Chamber Flux Anodizers Pyrolytic Conversion Tectonic Initiator Resin Funnel Pyro-Concentrator Mycelium Substrate Nether Substrate Ender Substrate Sapling Infuser Numismatic Press Pyroconvective Loop Flux Linkage Concentrator Flurry Stratum Permafrost Compressor Pyroclastic Injection Granitic Subduction Dioritic Subduction Andesitic Subduction
Dynamo Auxiliary Transmission Coil Fuel Catalyzer Transmission Coil Ducting Excitation Field Limiter Boiler Conversion Turbine Conversion Isentropic Reservoir Closed-Loop Cooling Ignition Plugs Elemental Catalyzer Lapidary Calibration
Other Florb (Magmatic) Coolants

© Copyright 2017 Team CoFH. Powered by GitHub Pages, Jekyll, UIkit.
Last updated: 2017-10-20 20:57:44 +0000