Bottles not included.
A placed alchemical imbuer can be instantly picked up by dismantling it with a wrench. Its configuration is preserved in the item. It can also be mined using a pickaxe, though this can be much slower.
Redstone Reception Coil +
Constantan Gear +
Hardened Glass +
When placed, an alchemical imbuer faces the player. It can face any of the four cardinal directions, and can be rotated using a wrench.
When an alchemical imbuer’s input tank is filled with water or a fluid potion and a reagent (brewing ingredient) is placed in its input slot, the machine will start consuming Redstone Flux to brew the corresponding potion. Potions are brewed in batches of 500 mB (2 bottles worth), with each batch costing 4,800 RF. When enough energy has been consumed for a batch, the input is consumed and the resulting fluid potion is placed in the output tank.
The speed at which an alchemical imbuer brews potions depends on how much energy it can use per tick. This in turn depends on how much power is being supplied, and on the machine’s maximum power usage. A basic brewer has a maximum power usage of 20 RF/t. This can be increased by upgrading the machine to a higher tier, and by installing certain augments.
Fluids and items can enter and exit an alchemical imbuer through its sides. Every side of a brewer may correspond to its input tank, its input slot, its output tank, or certain tanks/slots at the same time.
An alchemical imbuer can automaticaly transfer fluids out of any sides that directly correspond to its output tank. This is called auto-output. The machine can also transfer items from adjacent inventories into any sides that directly correspond to its input slot. This is called auto-input. Auto-output and auto-input occur whenever the machine finishes brewing a potion. Auto-output also occurs every 4 ticks (0.2 seconds). Auto-input also occurs every 32 ticks (1.6 seconds) if the machine is inactive.
A basic alchemical imbuer can automatically transfer up to 1,000 mB of fluid and up to 16 items at a time. These amounts can be increased by upgrading the machine to a higher tier.
Which sides correspond to which tanks/slots and whether auto-output and auto-input are enabled can be configured using the Configuration tab in the machine’s GUI.
An alchemical imbuer may be configured to respond to redstone signals. It can be in one of three modes:
The current mode can be set using the Redstone Control tab in the machine’s GUI.
An alchemical imbuer can have a signalum security lock installed to restrict who can access it.
An alchemical imbuer’s configuration can be saved on a redprint to be copied to other alchemical imbuers.
When an alchemical imbuer is active, it emits a light level of 12.
Alchemical imbuers come in five tiers.
|Tier||Max. power usage||Augment slots||Max. fluid per auto-transfer||Max. items per auto-transfer|
|Basic||20 RF/t||0||1,000 mB||16|
|Hardened||30 RF/t||1||1,000 mB||16|
|Reinforced||40 RF/t||2||3,000 mB||28|
|Signalum||50 RF/t||3||6,000 mB||44|
|Resonant||60 RF/t||4||10,000 mB||64|
An alchemical imbuer can have augments installed to improve certain properties or to change how it works. The amount of augments that can be installed depends on the machine’s tier. A basic alchemical imbuer cannot be augmented.
Augments can be installed in the Augmentation tab in an alchemical imbuer’s GUI.
|Auxiliary Reception Coil||Any machine||Increases a machine's maximum power usage (speed). However, also increases the amount of energy required per operation. Can be installed multiple times.|
|Reagent Recovery||Alchemical Imbuer||Provides a chance for an alchemical imbuer to not consume reagents (brewing ingredients). However, also increases the amount of energy required per operation. Can be installed multiple times.|