Induction Smelter


Induction smelter

Will absolutely not cook food.

An induction smelter, or smelter for short, is a machine that smelts items together at high temperatures. Despite the name, the machine cannot be used for smelting.

Obtaining

A placed induction smelter can be instantly picked up by dismantling it with a wrench. Its configuration is preserved in the item. It can also be mined using a pickaxe, though this can be much slower.

Crafting

Upgrading

An induction smelter is initially at the lowest tier (basic). It can be upgraded to higher tiers using upgrade kits and conversion kits.

Usage

Placement

When placed, an induction smelter faces the player. It can face any of the four cardinal directions, and can be rotated using a wrench.

Processing

An induction smelter has two input slots. When combinations of items are placed in these slots, the machine will start consuming Redstone Flux to process them. Every item combination requires a certain amount of energy to process. When enough energy has been consumed for an item combination, the input is consumed and the output is placed in the primary output slot. A secondary output may be produced when processing certain items, which is placed in the secondary output slot.

When installed, a pyro-concentrator allows an induction smelter to consume blazing pyrotheum, which is stored in an added input tank.

The speed at which an induction smelter processes items depends on how much energy it can use per tick. This in turn depends on how much power is being supplied, and on the machine’s maximum power usage. A basic smelter has a maximum power usage of 20 RF/t. This can be increased by upgrading the machine to a higher tier, and by installing certain augments.

Input and output

Items and fluids can enter and exit an induction smelter through its sides. Every side of a smelter may correspond to one of its input slots, one of its output slots, or certain slots at the same time. Fluids can enter a smelter through any side.

An induction smelter can automatically transfer items out of any sides that directly correspond to one of its output slots. This is called auto-output. It can also transfer items from adjacent inventories into any sides that directly correspond to one of its input slots. This is called auto-input. Auto-output and auto-input occur whenever the machine finishes processing an item, or every 32 ticks (1.6 seconds) if the machine is inactive.

A basic induction smelter can automatically transfer up to 16 items at a time. This amount can be increased by upgrading the machine to a higher tier.

Which sides correspond to which slots/tanks and whether auto-output and auto-input are enabled can be configured using the Configuration tab in the machine’s GUI.

One of an induction smelter’s input slots can be locked to only accept metallurgical fluxes: sand, soul sand, rich slag and cinnabar. These items are commonly used in smelter recipes. The slot is locked by default.

Redstone control

An induction smelter may be configured to respond to redstone signals. It can be in one of three modes:

Ignored
Redstone control is disabled. The smelter works whenever possible. This is the default mode.
Low
The smelter works when not powered. When powered, it stops working.
High
The smelter only works when powered.

The current mode can be set using the Redstone Control tab in the machine’s GUI.

Security

An induction smelter can have a signalum security lock installed to restrict who can access it.

Redprints

An induction smelter’s configuration can be saved on a redprint to be copied to other induction smelters.

Light source

When an induction smelter is active, it emits a light level of 14.

Tiers

Induction smelters come in five tiers.

Tier Max. power usage Augment slots Max. items per auto-transfer
Basic 20 RF/t 0 16
Hardened 30 RF/t 1 16
Reinforced 40 RF/t 2 28
Signalum 50 RF/t 3 44
Resonant 60 RF/t 4 64

Augmentation

An induction smelter can have augments installed to improve certain properties or to change how it works. The amount of augments that can be installed depends on the machine’s tier. A basic smelter cannot be augmented.

Augments can be installed in the Augmentation tab in a smelter’s GUI.

Augment Installable in Description
Auxiliary Reception Coil Auxiliary Reception Coil Any machine Increases a machine's maximum power usage (speed). However, also increases the amount of energy required per operation. Can be installed multiple times.
Auxiliary Sieve Auxiliary Sieve Machines with
secondary products
Increases the chances of a machine producing a secondary product. However, also increases the amount of energy required per operation. Can be installed multiple times.
Nullification Chamber Nullification Chamber Machines with
secondary products
Destroys excess secondary products when a machine's secondary output slot/tank is full, allowing it to keep working.
Metallurgical Recovery Metallurgical Recovery Induction Smelter Provides a chance for an induction smelter to not consume metallurgical fluxes (such as sand and rich slag). However, also increases the amount of energy required per operation. Can be installed multiple times.
Pyro-Concentrator Pyro-Concentrator Induction Smelter A specialization that allows for an induction smelter to process ores more efficiently using blazing pyrotheum. 100 mB of pyrotheum is consumed per ore.

Recipes

General

Ore processing

Ore processing with rich slag

Ore processing with cinnabar

Alloying

Recycling

Result(s) Ingredients Energy Induction Smelter recipe
Metal Ingot
Slag
Any Metal Gear +
Sand
3000 RF
Metal Ingot
Slag
Any Metal Plate +
Sand
2000 RF
Iron Ingot
Slag
Anvil +
Sand
4000 RF
31
50%
Iron Ingot
Slag
Slightly Damaged Anvil +
Sand
4000 RF
23
75%
Iron Ingot
Slag
Very Damaged Anvil +
Sand
4000 RF
15
100%
Iron Ingot
Slag
Weighted Pressure Plate (Heavy) +
Sand
4000 RF
2
10%
Gold Ingot
Slag
Weighted Pressure Plate (Light) +
Sand
4000 RF
2
10%
Iron Ingot
Slag
Bucket +
Sand
4000 RF
3
15%
Iron Ingot
Slag
Cauldron +
Sand
4000 RF
7
35%
Gold Ingot
Rich Slag
Clock +
Sand
4000 RF
4
20%
Iron Ingot
Rich Slag
Compass +
Sand
4000 RF
4
20%
Iron Ingot
Slag
Iron Door +
Sand
4000 RF
2
10%
Iron Ingot
Slag
Hopper +
Sand
4000 RF
5
25%
Metal Ingot
Slag
Any Metal Pickaxe +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Shovel +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Axe +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Hoe +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Fishing Rod +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Shears +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Hammer +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Sickle +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Sword +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Reinforced Bow +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Shield +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Helmet +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Chestplate +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Leggings +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Boots +
Sand
6000 RF
Metal Ingot
Slag
Any Metal Horse Armor +
Sand
6000 RF
Thermal Expansion 5
Machines
Redstone Furnace
Pulverizer
Sawmill
Induction Smelter
Phytogenic Insolator
Compactor
Magma Crucible
Fractionating Still
Fluid Transposer
Energetic Infuser
Centrifugal Separator
Sequential Fabricator
Alchemical Imbuer
Arcane Ensorcellator
Glacial Precipitator
Igneous Extruder
Devices
Aqueous Accumulator
Nullifier
Thermal Mediator
Arboreal Extractor
Aquatic Entangler
Item Allocator
Fluid Allocator
Lexical Transmuter
Insightful Condenser
Decoctive Diffuser
Factorizer
Creature Encaptulator
Vacuumulator
Dynamos
Steam Dynamo
Magmatic Dynamo
Compression Dynamo
Reactant Dynamo
Enervation Dynamo
Numismatic Dynamo
Storage
Energy Cell
Flux Capacitor
Portable Tank
Reservoir
Cache
Strongbox
Satchel
Augments
Machine
Auxiliary Reception Coil
Auxiliary Sieve
Nullification Chamber
Trivection Chamber
Flux Anodizers
Pyrolytic Conversion
Tectonic Initiator
Resin Funnel
Metallurgical Recovery
Pyro-Concentrator
Nutrient Recovery
Sapling Infuser
Monoculture Cycle
Numismatic Press
Gearworking Die
Pyroconvective Loop
Reflux Column
Alchemical Retort
Flux Linkage Concentrator
Flux Reconstruction
Parabolic Flux Coupling
Enstabulation Apparatus
Pattern Validation
Fluidic Fabrication
Reagent Recovery
Pyroclastic Injection
Clastic Deposition
Dynamo
Auxiliary Transmission Coil
Fuel Catalyzer
Transmission Coil Ducting
Excitation Field Limiter
Boiler Conversion
Turbine Conversion
Isentropic Reservoir
Closed-Loop Cooling
Ignition Plugs
Agitative Manifold
Elemental Catalyzer
Disjunctive Extraction
Lapidary Calibration
Other
Coolants
Florb
(
Magmatic
)
Morb
(
Reusable
)

© Copyright 2015-2018 Team CoFH. Powered by GitHub Pages, Jekyll, UIkit.
Last updated: 2018-07-30 11:15:58 +0000