Glowstone Illuminator


The Glowstone Illuminator is one of the lighting blocks added by Thermal Expansion. The block's color and response to Redstone signals are both highly configurable. The Illuminator can be crafted into six different shapes, some of which can be rotated and/or placed on walls or ceilings.

Illuminators can be moved around without losing their configuration by dismantling them using a Crescent Hammer or similar. Redprints may also be used to copy the configuration of an Illuminator to other Illuminators or Lumium Lamps.

Crafting

Shapes

Glowstone Illuminator (Flat)

Shaped Crafting
  • 2x Glowstone Illuminator
Glowstone Illuminator (Tiny)

Shaped Crafting
  • Glowstone Illuminator

Glowstone Illuminator (Bulb)

Shaped Crafting
  • 2x Glowstone Illuminator (Tiny)
Glowstone Illuminator (Strip)

Shaped Crafting
  • 3x Glowstone Illuminator

Glowstone Illuminator (Torch-shaped)

Shaped Crafting
  • 2x Glowstone Illuminator

Modes

The Glowstone Illuminator can be in one of several modes in how it responds to Redstone signals. These modes can be cycled through in the Illuminator's GUI or by using a Crescent Hammer on it.

  • Switched; Default: Off - Off by default, turned on by Redstone signals.
  • Switched; Default: On - On by default, turned off by Redstone signals.
  • Scaled (Proportional) - Off by default, brightness increases with Redstone signal strength.
  • Scaled (Inverse) - On by default, brightness decreases with Redstone signal strength.
  • Always Off - Not affected by Redstone signals.
  • Always On - Not affected by Redstone signals.

GUI

The Glowstone Illuminator can be configured by sneaking and using a Multimeter on it. The Illuminator's GUI is then opened:

1. Color Reset Button
Resets the Illuminator's color to its default.
2. Dim Toggle Button
Sets whether the Illuminator is 'dim'. Dim Illuminators glow in the dark when on, but don't actually emit any light.
3. Mode Slider
Sets the current Redstone mode of the Illuminator.
4. Color preview
Displays the currently set color of the Illuminator.
5. Red Color Slider
Sets the amount of red light in the Illuminator's color, in a range of 0 to 255.
6. Green Color Slider
Sets the amount of green light in the Illuminator's color, in a range of 0 to 255.
7. Blue Color Slider
Sets the amount of blue light in the Illuminator's color, in a range of 0 to 255.
8. Information Tab
Displays a bit of information about the Illuminator.

© Copyright 2017 Team CoFH. Powered by GitHub Pages, Jekyll, UIkit.
Last updated: 2017-07-21 20:04:38 +0000