A placed compression dynamo can be instantly picked up by dismantling it with a crescent hammer. Its configuration is preserved in the item. It can also be mined using a pickaxe, though this can be much slower.
When placed, a compression dynamo faces up. If an adjacent block accepts Redstone Flux, the dynamo will face that block instead. A compression dynamo can face any direction, and can be rotated using a crescent hammer or similar.
When a compression dynamo is filled with fluid fuel and coolant, it will start consuming both to generate Redstone Flux. Fuel and coolant are consumed in batches of 100 mB. Every batch of fuel yields a certain amount of energy when consumed. Every batch of coolant can be used to generate a certain amount of energy; this amount is equal to the thermal capacity of the used coolant.
The speed at which energy is generated and fuel and coolant are consumed depends on how much power can be emitted, and on the dynamo’s maximum power output. A basic compression dynamo has a maximum power output of 40 RF/t. This can be increased by upgrading the dynamo to a higher tier, and by installing certain augments.
When an active compression dynamo cannot emit the energy it generates, it will keep working at its minimum power output (a tenth of its maximum power output). Any more energy that is generated in this case is lost. This can be resolved by installing an excitation field limiter.
A compression dynamo emits Redstone Flux from its coil, which points in the direction the dynamo is facing. It only emits energy when it is active. Fluids can enter a compression dynamo through its sides. They cannot enter it through the coil, unless transmission coil ducting is installed.
A compression dynamo may be configured to respond to redstone signals. It can be in one of three modes:
The current mode can be set using the Redstone Control tab in the dynamo’s GUI.
When a compression dynamo must stop working due to a redstone signal and is still generating energy from a consumed batch of fuel, it will finish generating energy from that batch before stopping.
A compression dynamo can have a signalum security lock installed to restrict who can access it.
A compression dynamo’s configuration can be saved on a redprint to be copied to other dynamos.
When a compression dynamo that produces Redstone Flux is active, it emits a light level of 7.
Compression dynamos come in six tiers.
|Tier||Max. power output||Augment slots|
|Resonant / Creative||120 RF/t||4|
A compression dynamo can have augments installed to improve certain properties or to change how it works. The amount of augments that can be installed depends on the dynamo’s tier. A basic compression dynamo cannot be augmented.
Augments can be installed in the Augmentation tab in a compression dynamo’s GUI.
|Auxiliary Transmission Coil||Any dynamo||Increases a dynamo's maximum power output (speed). However, also decreases the amount of energy generated from each unit of fuel. Can be installed multiple times.|
|Fuel Catalyzer||Any dynamo||Increases the amount of energy a dynamo generates from each unit of fuel. Can be installed multiple times.|
|Transmission Coil Ducting||Any dynamo||Allows items and fluids to enter a dynamo through its coil, which can normally only emit energy.|
|Excitation Field Limiter||Any dynamo||Lowers the minimum power output of a dynamo to zero, preventing energy loss when it is active and cannot emit the energy it generates.|
Steam Dynamo or
Magmatic Dynamo or
|A specialization that changes an applicable dynamo to convert water into steam instead of generating Redstone Flux. This increases fuel efficiency.|
|Closed-Loop Cooling||Compression Dynamo||A specialization that allows for a compression dynamo to work without consuming coolant. However, at least some coolant must be present in the dynamo for it to work.|
|Ignition Plugs||Compression Dynamo||A specialization that greatly increases a compression dynamo's maximum power output and the amount of energy it generates from each unit of fuel. However, the dynamo can only generate energy using refined fuel.|
The following fluids can be consumed by a compression dynamo to generate varying amounts of energy.
|Fuel||Energy per 1000 mB|
|Creosote Oil||100,000 RF|
|Liquifacted Coal||400,000 RF|
|Crude Oil||400,000 RF|
|Tree Oil||1,000,000 RF|
|Refined Fuel||2,000,000 RF|
|Canola Oil (Actually Additions)||80,000 RF|
|Oil (Actually Additions)||200,000 RF|
|Crystallized Oil (Actually Additions)||400,000 RF|
|Empowered Oil (Actually Additions)||700,000 RF|
|Ethanol (Forestry)||500,000 RF|
|Biodiesel (Immersive Engineering)||500,000 RF|
|Crude Oil (Immersive Petroleum)||400,000 RF|
|Diesel (Immersive Petroleum)||800,000 RF|
|Gasoline (Immersive Petroleum)||1,200,000 RF|
|Biogas (IndustrialCraft²)||100,000 RF|
|BioFuel (MineFactory Reloaded)||500,000 RF|