Put down the axe.
Redstone Servo +
Iron Gear +
any Wood Planks +
When placed, an arboreal extractor faces the player. It can face any of the four cardinal directions, and can be rotated using a wrench.
An active arboreal extractor produces a certain amount of a fluid every 500 ticks (25 seconds). The amount of time increases when other arboreal extractors are nearby.
|Adjacent extractors||Cycle length|
|0||500 ticks (25 seconds)|
|1||750 ticks (37.5 seconds)|
|2 or more||1,000 ticks (50 seconds)|
The amount of fluid an arboreal extractor produces per cycle can be increased by placing fertilizer items in its fertilizer slot. Fertilizer will boost the device’s production for 8 cycles per item.
|Fertilizer type||Production multiplier|
|Rich Phyto-Gro||× 3|
|Fluxed Phyto-Gro||× 4|
Items and fluids can enter and exit an arboreal extractor through its sides. Every side of an arboreal extractor may correspond to its fertilizer slot, its output tank, or both at the same time.
An arboreal extractor can automatically transfer fluids out of any sides that directly correspond to its output tank. This is called auto-output. The device can automatically transfer up to 1,000 mB of fluid at a time. It can also transfer items from adjacent inventories into any sides that directly correspond to its fertilizer slot. This is called auto-input. Auto-output and auto-input occur at the same speed at which fluid is produced. Auto-output occurs after fluid is produced, and auto-input occurs right before fluid is produced.
Which sides correspond to which slots/tanks and whether auto-output and auto-input are enabled can be configured using the Configuration tab in the device’s GUI.
An arboreal extractor may be configured to respond to redstone signals. It can be in one of three modes:
The current mode can be set using the Redstone Control tab in the device’s GUI.
An arboreal extractor can have a signalum security lock installed to restrict who can access it.
An arboreal extractor’s configuration can be saved on a redprint to be copied to other arboreal extractors.
The fluid that an arboreal extractor produces and the amount of fluid that is produced per cycle depends on the type of tree.
|Tree type||Extracted fluid||Fluid per cycle|
|Dark Oak||Sap||100 mB|
|Huge brown mushroom||Mushroom Stew||50 mB|
|Huge red mushroom||Mushroom Stew||50 mB|